Lucent Technologies 8.2 User Manual
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
558
Data modules
17
Pin Number
This field can be used for any combination of the pager pin number and pauses or
left blank. Displays when the Alert Pager field is
left blank. Displays when the Alert Pager field is
y
.
DTMF Duration - Tone (msec)
The length of time the Dual-Tone Multi-Frequency (DTMF) tone is heard for each
digit. Displays when the Alert Pager field is
digit. Displays when the Alert Pager field is
y
.
Pause (msec)
The length of time between DTMF tones for each digit. Displays when the Alert
Pager field is
Pager field is
y
.
Data modules
The following section provides descriptions of standard fields on Data Module
screens. Some of the fields are used for specific data module types; others are used
for all data modules. Unique fields and fields requiring special consideration are
listed with the appropriate data module descriptions in this book.
screens. Some of the fields are used for specific data module types; others are used
for all data modules. Unique fields and fields requiring special consideration are
listed with the appropriate data module descriptions in this book.
Valid entries
Usage
digits
0-9
p
(ause)
#
(pound)
*
(star)
Enter a number up to 15 digits. A pause (about 2 seconds) is for
timing of the message. For instance, after the pin number you
may want to have a pause to allow time for the pager service to
set up the correct pager message box. If the pager service
requires you to submit a PIN number, enter it here.
timing of the message. For instance, after the pin number you
may want to have a pause to allow time for the pager service to
set up the correct pager message box. If the pager service
requires you to submit a PIN number, enter it here.
Valid entries
Usage
20
-
2550
Enter a number in increments of 10.
Valid entries
Usage
20
-
2550
Enter a number in increments of 10.