Toshiba Toshiba User Manual

 
©TOSHIBA Corp. 

24 

1.5.3

 Output 

Code 

Status 

Code

Status

Code

Status

20 OK 

33

InvalidOperand

52

OKbutExtControlOFF

30 InvalidType 

34

NoEntryData

92

CriticalError

31 InvalidEntry 50

OKbutExtAlarmOFF

32 InvalidValue 

51

OKbutMotionOFF

- 

50: Although registration succeeded under conditions of type=FTPCondition, Mode=3 and AlarmInMode =2, the Alarm In function is set to “OFF”. 

 

(Ref. Alarm Settings)

 

- 

51:

Although registration succeeded under conditions of type=FTPCondition, Mode=3 and MotionMode=2, the Motion Detection function is set to “OFF”.   

(Ref. AlarmSettings) 

- 

52:Although registration succeeded under conditions of both type=FTPCondition and Mode=4, the Ext. Control In function is set to “OFF”.

 

(Ref.Alarm Settings)

 

 

1.5.4

 Example 

1) http://10.1.0.1/api/wbsetcamftprecord.cgi?type=Default 
2) http://10.1.0.1/api/wbsetcamftprecord.cgi?type=FTPCondition&Mode=3&AlarmInMode=2&MotionMode=2 
3) http://10.1.0.1/api/wbsetcamftprecord.cgi?type=Server-1&Name=FTPs&LoginID=<base64enc>&Password=<basee64enc> 
4) http://10.1.0.1/api/wbsetcamftprecord.cgi?type=Server-2&Name=FTPs&LoginID=<base64enc>&Password=<basee64enc> 
5) http://10.1.0.1/api/wbsetcamftprecord.cgi?type=AttachedPicture&Size=3 
6) http://10.1.0.1/api/wbsetcamftprecord.cgi?type=HowToUse&Detail=1 
7) http://10.1.0.1/api/wbsetcamftprecord.cgi?type=bySchedule&Interval=5 
8) http://10.1.0.1/api/wbsetcamftprecord.cgi?type=byAlarm&Interval=10&AiFileName=_ext_&MdFileName=_mtd_ 
9) http://10.1.0.1/api/wbsetcamftprecord.cgi?type=byExtControlIn&Interval=10&FileName=extc&Server1Path=/cam/jpge 
10) http://10.1.0.1/api/wbsetcamftprecord.cgi?type=Accumulation&Mode=2&Interval=10 

 

1.5.5

 Notes 

1)  If only type=<value> is entered and then <entry>=<value> is not entered, no setting is performed. (type=Default is an exception.) 
2) Multiple 

type=<value> cannot be enumerated simultaneously. This API must be started for each type. 

3)  When LoginID/Password is specified at type=Server-1/2, these must be base64-encoded. 
4)  When a blank character is included in <value>, it must be URL-encoded. 
5)  For only entered items, setting is performed. For the other items, their existing values are held. 
6)  When OpeLog=No is entered, a log related to API start/end is not output. When it is omitted, it is regarded as OpeLog=Yes.