Toshiba Toshiba 用户手册
TOSHIBA Network Camera - IK-WB15A - SDK (Ver 1.00.SC)
©TOSHIBA Corp.
24
1.5.3
Output
Code
Status
Code
Status
Code
Status
20 OK
33
InvalidOperand
52
OKbutExtControlOFF
30 InvalidType
34
NoEntryData
92
CriticalError
31 InvalidEntry 50
OKbutExtAlarmOFF
32 InvalidValue
51
OKbutMotionOFF
-
50: Although registration succeeded under conditions of type=FTPCondition, Mode=3 and AlarmInMode =2, the Alarm In function is set to “OFF”.
(Ref. Alarm Settings)
-
51:
Although registration succeeded under conditions of type=FTPCondition, Mode=3 and MotionMode=2, the Motion Detection function is set to “OFF”.
(Ref. AlarmSettings)
-
52:Although registration succeeded under conditions of both type=FTPCondition and Mode=4, the Ext. Control In function is set to “OFF”.
(Ref.Alarm Settings)
1.5.4
Example
1) http://10.1.0.1/api/wbsetcamftprecord.cgi?type=Default
2) http://10.1.0.1/api/wbsetcamftprecord.cgi?type=FTPCondition&Mode=3&AlarmInMode=2&MotionMode=2
3) http://10.1.0.1/api/wbsetcamftprecord.cgi?type=Server-1&Name=FTPs&LoginID=<base64enc>&Password=<basee64enc>
4) http://10.1.0.1/api/wbsetcamftprecord.cgi?type=Server-2&Name=FTPs&LoginID=<base64enc>&Password=<basee64enc>
5) http://10.1.0.1/api/wbsetcamftprecord.cgi?type=AttachedPicture&Size=3
6) http://10.1.0.1/api/wbsetcamftprecord.cgi?type=HowToUse&Detail=1
7) http://10.1.0.1/api/wbsetcamftprecord.cgi?type=bySchedule&Interval=5
8) http://10.1.0.1/api/wbsetcamftprecord.cgi?type=byAlarm&Interval=10&AiFileName=_ext_&MdFileName=_mtd_
9) http://10.1.0.1/api/wbsetcamftprecord.cgi?type=byExtControlIn&Interval=10&FileName=extc&Server1Path=/cam/jpge
10) http://10.1.0.1/api/wbsetcamftprecord.cgi?type=Accumulation&Mode=2&Interval=10
2) http://10.1.0.1/api/wbsetcamftprecord.cgi?type=FTPCondition&Mode=3&AlarmInMode=2&MotionMode=2
3) http://10.1.0.1/api/wbsetcamftprecord.cgi?type=Server-1&Name=FTPs&LoginID=<base64enc>&Password=<basee64enc>
4) http://10.1.0.1/api/wbsetcamftprecord.cgi?type=Server-2&Name=FTPs&LoginID=<base64enc>&Password=<basee64enc>
5) http://10.1.0.1/api/wbsetcamftprecord.cgi?type=AttachedPicture&Size=3
6) http://10.1.0.1/api/wbsetcamftprecord.cgi?type=HowToUse&Detail=1
7) http://10.1.0.1/api/wbsetcamftprecord.cgi?type=bySchedule&Interval=5
8) http://10.1.0.1/api/wbsetcamftprecord.cgi?type=byAlarm&Interval=10&AiFileName=_ext_&MdFileName=_mtd_
9) http://10.1.0.1/api/wbsetcamftprecord.cgi?type=byExtControlIn&Interval=10&FileName=extc&Server1Path=/cam/jpge
10) http://10.1.0.1/api/wbsetcamftprecord.cgi?type=Accumulation&Mode=2&Interval=10
1.5.5
Notes
1) If only type=<value> is entered and then <entry>=<value> is not entered, no setting is performed. (type=Default is an exception.)
2) Multiple
2) Multiple
type=<value> cannot be enumerated simultaneously. This API must be started for each type.
3) When LoginID/Password is specified at type=Server-1/2, these must be base64-encoded.
4) When a blank character is included in <value>, it must be URL-encoded.
5) For only entered items, setting is performed. For the other items, their existing values are held.
6) When OpeLog=No is entered, a log related to API start/end is not output. When it is omitted, it is regarded as OpeLog=Yes.
4) When a blank character is included in <value>, it must be URL-encoded.
5) For only entered items, setting is performed. For the other items, their existing values are held.
6) When OpeLog=No is entered, a log related to API start/end is not output. When it is omitted, it is regarded as OpeLog=Yes.
7) Be very careful that the value of ‘Detail’ entry of type=HowToUse differs from the entry format of WEB setting page.