Lucent Technologies Release 7 User Manual
DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-163
monitor system
8
Output
The following output fields are for the monitor system view1 and monitor
system view2 commands.
system view2 commands.
For the following output example, the command monitor system view1 was
entered.
entered.
Console #
A list of console numbers that are either activated or deactivated.
Activated:
The attendant console is in service. An attendant console is
considered activated if its handset/headset is plugged in, it is not
busied out, and the system is in day service and the console is a day
or day/night or principle console, or the system is in night service and
the console is a night or day/night console.
considered activated if its handset/headset is plugged in, it is not
busied out, and the system is in day service and the console is a day
or day/night or principle console, or the system is in night service and
the console is a night or day/night console.
Deactivated:
The attendant console is not in service. The attendant console is
considered deactivated if it does not meet the previous activated
conditions.
considered deactivated if it does not meet the previous activated
conditions.
# of alarms
for trunks
The total number of existing minor and major alarms on trunk ports.
# of alarms
for other
resources
The total number of existing minor and major alarms on all
maintainable objects in the system except trunks and stations.
maintainable objects in the system except trunks and stations.
First OSS
number has
been
informed?
Has all the alarm been reported and acknowledged by the first OSS
telephone number. If the “Alarm Origination” is not enable or there are
no active alarm, the field will be “n”.
telephone number. If the “Alarm Origination” is not enable or there are
no active alarm, the field will be “n”.
MeasurementH
our
The starting time of the period for which the measurement was taken.
For example, if the measurement hour is shown as 1800, it means the
traffic status data displayed is for the time period from 6 PM to 7 PM
(The measurement is taken on an hourly basis).
For example, if the measurement hour is shown as 1800, it means the
traffic status data displayed is for the time period from 6 PM to 7 PM
(The measurement is taken on an hourly basis).
Grp no
A number between 1 and the maximum trunk group number or
maximum hunt group number in the system.
maximum hunt group number in the system.
Grp dir
Group direction: incoming, outgoing or two way.
Calls qued
Total calls that arrived and were placed in the queue for trunk groups.
Calls aban
Total calls that were abandoned by the caller.
%Out blkg:
The ratio of outgoing calls that are not carried (due to overload
conditions) on a trunk group to the outgoing calls offered.
conditions) on a trunk group to the outgoing calls offered.
% Time ATB:
The percentage of time within the polling interval that all trunks in the
trunk group were unavailable for use.
trunk group were unavailable for use.
Time of day
The current time of day acquired from the system.