Lucent Technologies Release 7 User Manual
DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-183
reset port-network
8
Output
One of the following messages is displayed:
Command successfully completed
If the reset pnc interchange command is unsuccessful due to the state of health
of the standby Port Network Connectivity, operation of anti-thrashing, or the
following message will be displayed:
of the standby Port Network Connectivity, operation of anti-thrashing, or the
following message will be displayed:
Interchange of pnc failed;
try again using the ’override-and-lock’ identifier
See the preceding caution regarding use of the override-and-lock option. If the
reset pnc interchange command is unsuccessful due to a busyout of the standby
PNC, the following message will be displayed:
reset pnc interchange command is unsuccessful due to a busyout of the standby
PNC, the following message will be displayed:
Must release port network connectivity first
reset port-network
reset port-network PN# level [1 | 2]
!
CAUTION:
A reset of level 2 is destructive, causing all calls and application links on the
specified EPN to drop. EPN resets are described under EXP-PN in
specified EPN to drop. EPN resets are described under EXP-PN in
Chapter
9
.
This command resets a specified port network to a specified level. This does not
cause an interchange on a system with duplicated PNC. The command will not
execute on the PPN, or on an EPN whose fiber link to the PPN or CSS is down.
cause an interchange on a system with duplicated PNC. The command will not
execute on the PPN, or on an EPN whose fiber link to the PPN or CSS is down.