Lucent Technologies Release 7 User Manual
DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-310
status sys-link
8
Output
The following example shows the output for the status synchronization
command.
command.
status sys-link
status sys-link UUCSSpp [ channel channel# ] [print]
The status sys-link command displays status data for a specified system link. The
report includes the type and operational state of the link, the associated
processor channel, if any, active alarms and path status, and a list of all hardware
components making up the link’s path. If in addition to the current path a faulted
path exists, the components making up the faulted path are displayed on page 2
of the report.
report includes the type and operational state of the link, the associated
processor channel, if any, active alarms and path status, and a list of all hardware
components making up the link’s path. If in addition to the current path a faulted
path exists, the components making up the faulted path are displayed on page 2
of the report.
Parameters
Examples
status sys-link 1e0201
status sys-link 1c17 channel 2
status sys-link 1c17 channel 2
Output
UUCSSpp
The link is specified by giving the location of the port associated with the
link.
link.
channel#
If the link is an X.25 link (to an adjunct or another switch), you must specify a
processor channel number (1-128) associated with the link.
processor channel number (1-128) associated with the link.
Location
The location of the port associated with the system link
(cabinet-carrier-slot-circuit).
(cabinet-carrier-slot-circuit).
status synchronization SPE B
SYNCHRONIZATION STATUS
Stratum Level: 4
Inferred Sync Reference: UDS1-BD Location: 01C20
Excessive Reference Switching: No
Inferred Sync Reference: UDS1-BD Location: 01C20
Excessive Reference Switching: No