Lucent Technologies Release 7 User Manual
DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Object Repair Procedures
9-60
ANL-24-L (24-Port Analog Line)
9
ANL-24-L (24-Port Analog Line)
The 24-Port Analog Line circuit pack (TN793) provides 24 ports for voice
terminals and supports both on-premises and off-premises analog voice
terminals.
terminals and supports both on-premises and off-premises analog voice
terminals.
No maintenance of the terminal connected to the 24-Port Neon Analog Line
circuit pack is performed, except to determine whether or not the terminal is
connected. Failures of the neon message waiting lamp power and the common
ringing application circuitry are reported as part of common port circuit pack
errors. See errors 1281 and 1793 in the “XXX-BD (Common Port Circuit Pack)”
section.
circuit pack is performed, except to determine whether or not the terminal is
connected. Failures of the neon message waiting lamp power and the common
ringing application circuitry are reported as part of common port circuit pack
errors. See errors 1281 and 1793 in the “XXX-BD (Common Port Circuit Pack)”
section.
NOTE:
This analog line circuit pack supports analog data modules. When
assigned, analog data modules provide access to the Net Pkt (TN794) data
ports. To activate an analog data module you must assign the port location
on the data form and connect a modem to the port. (The analog data
module may be used for connection to a CDR output or other adjuncts as
needed.) These ports are tested the same as all other analog ports on the
circuit pack.
assigned, analog data modules provide access to the Net Pkt (TN794) data
ports. To activate an analog data module you must assign the port location
on the data form and connect a modem to the port. (The analog data
module may be used for connection to a CDR output or other adjuncts as
needed.) These ports are tested the same as all other analog ports on the
circuit pack.
Ringing Caused by Maintenance Testing
Test #48 may cause some terminal equipment to ring briefly during daily
maintenance. If this ringing is disturbing the customer or the terminal equipment,
it should be disabled in the
maintenance. If this ringing is disturbing the customer or the terminal equipment,
it should be disabled in the
Test?
field of the change station extension form. Be
aware that this action also disables Tests #6, 7, 161, and 35.
MO Name (in
Alarm Log)
Alarm Level
Initial Command to
Run
1
1.
UU is the universal cabinet number (1 for PPN, 2 -44 for EPNs); C is the carrier
designation (A, B, C, D, or E); SS is the number of the slot in which the circuit pack resides
(01 to 21); and pp is the two digit port number (01, 02, ...).
designation (A, B, C, D, or E); SS is the number of the slot in which the circuit pack resides
(01 to 21); and pp is the two digit port number (01, 02, ...).
Full Name of MO
ANL-24-L
MIN
test port UUCSSpp l
24-Port Analog Line
ANL-24-L
WRN
test port UUCSSpp sh
24-Port Analog Line