JVC VN-686WPBU User Manual
36
IP address setting procedure
Follow the procedure below to configure the IP
address of the camera.
address of the camera.
G
G
G
䢇 System configuration required for setting
IP address
Camera at factory default is set to
ADHCP
Enable
B (DHCP client function is On). When it is
connected to a LAN without DHCP servers, it will
activate under the following IP address after
timeout.
activate under the following IP address after
timeout.
IP address
: 192.168.0.2
Subnet mask
: 255.255.255.0
Default gateway
: None
Memo
:
● To set a static IP address for the camera,
connect the camera, the switching hub and
the computer for setting using a straight LAN
cable of Category 5 and above.
the computer for setting using a straight LAN
cable of Category 5 and above.
䢇 Set up the computer for setting the IP
address.
● Minimum computer specifications for
setting
OS
OS
: Windows XP (Professional or
Home Edition) (SP2)
Web browser
: Internet Explorer Version 6.0
Note:
● When setting the IP address of the camera,
do so by using a network that is made up of
only the camera, the computer for setting and
the switching hub.
only the camera, the computer for setting and
the switching hub.
● Using a hub connected to other network
devices or networks via a LAN cable for
setting can cause problems.
setting can cause problems.
IP Address Settings
Set the IP address of the computer for
configuring the camera settings.
configuring the camera settings.
Configure the Internet Explorer settings in
order to establish connection between the
computer and the camera.
order to establish connection between the
computer and the camera.
Connect the computer to the camera.
Set the [DHCP Disable] item on the [Basic
Settings1] screen to
Settings1] screen to
ADHCP EnableB or
ADHCP EnableB.