Manualsbrain.com
  1. Manuals
  2. Brands
  3. JVC
  4. VN-686WPBU
  5. User Manual

JVC VN-686WPBU User Manual

Download
Page of 130
37
IP address setting at the computer
Set the computer to an IP address that enables communication with the camera.
1 
Click [Start]
● Select in the sequence of [Control Panel]-[Network Connection]-[Local Area].
Windows Vista:
● Select in the sequence of [Settings]- [Control Panel]- [Network Center]- [Network Connection].
2 
The computer on which Internet Explorer is launched automatically selects the 
connected network
● Right-click and select [Properties].
● Check to ensure that the [Client for Microsoft Networks] and [Internet Protocol(TCP/IP)] check 
boxes are selected.
Windows Vista:
● Check to ensure that the [Client for Microsoft Networks] and [Internet Protocol Version 4 (TCP/
IPv4)] check boxes are selected.
3 
Select [Internet Protocol(TCP/IP)] and click [Properties]
Windows Vista:
● Select [Internet Protocol Version 4 (TCP/IPv4)] and click [Properties].
4 
Set the IP address
5 
Click [OK] on the [Local Area Connection Propertise] screen
A
B
C
D
E
Click [OK].
Specify the [IP address]. (For example, use 
192.168.0.100 when the camera is in its 
default settings and there is no DHCP 
server.)
Memo
: 
                                              
Make sure that you take note of the original IP 
address before altering.
Note: 
                                                       
Ensure that a duplicate IP address is not specified 
within the same network environment.
Set [Subnet mask] to a value that is 
appropriate for the setting operation. Consult 
the network administrator if you have any 
queries.
(Use 255.255.255.0  the camera is in its 
default settings and there is no DHCP 
Select [Use the following IP address].
When a [Default gateway] is present, make 
use of the corresponding IP address (e.g., 
192.168.0.254).