American Dynamics RAS917 User Manual

 

SPEEDDOME ULTRA VII CAMERA DOME CONFIGURATION UTILITY 

8200-0184-09, REV. A 

OPERATOR’S MANUAL SUPPLEMENT 

6 of 13

 

 (Zoom In) or 

Twist joystick 
clockwise 

Move the cursor to the right of 
the current character in the 
name or password. 

 (Zoom Out) 

or Twist joystick 
counterclockwise 

Move the cursor to the left of 
the current character in the 
name. 

Table 5 provides the special commands available 
when using the dome in an AD-UTC network. 
These commands are available when you enter the 
keyboard combination provided. 

 (Function), 

Preset # (1-96), and 

then 

(Preset) 

Program selected Preset 

Preset # (1-96), and 

then 

(Preset) 

Recall selected Preset 

(Function), 

pattern # (1-3), and 

then 

 + 

 

(Shift+Preset) 

Start selected Pattern 
programming 

Pattern # (1-3), and 

then 

(Function) 

Save Pattern programming 

Pattern # (1-3), and 

then 

 + 

 

(Shift and Preset) 

Run selected Pattern 
continuously 

 + 

 

(Function+Focus Far)  

 + 

  

(Function+Focus 
Near) 

Resume Auto Focus mode 

 + 

 

(Function+Iris Open) 

 + 

  

(Function+Iris Close) 

Resume Auto Iris mode 

 (Flip) 

Rotate dome 180° from current 
position (“flip”) 

Keep the following considerations in mind when 
using the SpeedDome Ultra VII camera dome in 
the AD-UTC environment. 

The SpeedDome Ultra VII camera dome must be 
set to address 891 to operate in the AD-UTC 
environment. When the dome initializes or resets, 
the address and protocol information (UTC_T) 
appear on-screen. 

The Quick Set Menu provides easy access to 
specific SpeedDome Ultra VII functions from the 
keyboard. To access the Quick Set menu, select 

the dome, and press 

 (Quick Set button). 

See Quick Set Menu on page 2 for information 
about the Quick Set functions. 

The following provides information about 
SensorNet and RS-422 controllers compatible with 
SpeedDome Ultra VII. Specific operating 
considerations are also included. 

Supported Protocol 

SensorNet 

Maximum Presets 

0 

Maximum Patterns (1) 

1 

Quick Set Menu 

Not supported 

Address Range 

1-8 

(1)  Apple Peel only. Programmable patterns are 

not available.