Little Wonder LB901-00-01 User Manual

Pages 14-17.

1.  Install lower handles 

15 on top of deck 17 & 18. 

Secure with (4) cap screws 5/16-18 X 1-3/4 

19, 

(4) 5/16 flat washers 

16, and (4) 5/16-18 nylon 

nuts 

1, finger tight.  (See Figure 2)

2.  Install upper handle 

6 with (4) 5/16-18 X 1-3/4 

cap screws 

19, (8) 5/16 washers 16, and (4) 

5/16-18 nylon nuts 

1, finger tight.  Tighten lower 

handle nuts and bolts.  Tighten upper handle nuts 

and bolts until the lower handle tubing pinches 

the upper handle.  It will be normal for the lower 

handle tubing to crush slightly.  

3.

  Attach brace 23 with (2) 5/16-18x2 cap screws 9, 

(4) 5/16 washers 

16, and (2) 5/16-18 nylon nuts 

4.  Attach throttle cable 

5 to upper handle 6 with 

(1) 1/4-20 X 1-3/4” cap screw 

8 and (1) 1/4-20 

locknut 

10 through hole on upper handle 6 on the 

left handside.   Connect throttle clip

 4 to upper 

handle  

NOTE:  Over tightening the screw on the left hand 

mounted controls could cause damage to the 

control.) 

5.  Tilt blower back on handle and install front wheel 

bracket 

17 over the three studs on lower front of 

blower housing 

2.  Secure with (3) 5/16-18 flange 

nuts 

1.  (See Figure 3)

6.  Insert pneumatic wheel sleeve 

19 in front 

pneumatic wheel 

18.  Install pneumatic wheel 

spacers 

20 over the axle sleeve on both sides 

of wheel and install in front wheel bracket 

17.  

Insert 3/8-16  X 5-1/2 axle bolt 

16 through wheel 

bracket and axle sleeve.  Secure with 3/8-16 axle 

nut 

15.  (See Figure 3)