Roland VS-700 User Manual

 

Creating a Performance

 

This changes the volume and cutoff frequency for each part 

according to the velocity with which the keys are pressed. If 

you want strongly played notes to raise the volume/cutoff 

frequency, set this parameter to positive (+) settings. If you 

want strongly played notes to lower the volume/cutoff 

frequency, use negative (-) settings. Set Velocity Sensitivity to 

“0” when you want sounds played at a fixed volume and 

cutoff frequency, regardless of the force with which the keys 

are played.

 

-63– +63

 

Patches also contain a Velocity Sensitivity Offset setting 

the sum of the part’s and the patch’s Velocity Sensitivity 

Offsets. Accordingly, if the patch’s Velocity Sensitivity 

Offset parameter is set to “127” (maximum), there will 

be no change in the part’s Velocity Sensitivity Offset, 

even when this is set to a positive value.

 

Specifies the amount of pitch change in semitones (2 

octaves) that will occur when the Pitch Bend Lever is moved. 

The amount of change when the lever is tilted is set to the 

same value for both left and right sides. If you want to use the 

 

0–24, PAT

 

For each part, specify whether MIDI messages will be 

received (ON), or not (OFF).

If this is “OFF,” the part will not respond. Normally, you 

should leave this “ON,” but you can turn it “OFF” when you do 

not want a specific part to be playing during song playback.

 

OFF, ON

The Fantom VS allows you to use temperaments other than 

equal temperament.

 

Make scale tune settings for each part.

 

-64– +63

 

Scale Tune settings

 

Parameter List

VS-700_r_e.book 141 ページ ２００８年１１月２０日　木曜日　午後２時２８分