Siemens 9300 User Manual
9300 Series User’s Guide
Factory Information
Chapter 3 - Default Meter Functionality
Page 53
Factory Information
The Factory module displays firmware version, serial number and other device
information in read-only setup registers (read-only registers can be viewed but not
changed).
information in read-only setup registers (read-only registers can be viewed but not
changed).
Factory Module Settings
The device information provided is as follows:
The Factory module also contains numerous read-only setup registers that hold
the calibration constants used at the factory.
the calibration constants used at the factory.
How to TAG Your Meter
Three setup registers are provided for you to enter your company name and other
text information you want stored in the device. These configurable setup registers
are as follows:
text information you want stored in the device. These configurable setup registers
are as follows:
Owner - This is a text register for storing user information (e.g. company name);
it can be up to 255 characters in length.
it can be up to 255 characters in length.
Tag 1 - This is a text register for storing user information (e.g. device location); it
can be up to 15 characters in length.
can be up to 15 characters in length.
Tag 2 - This is a text register for storing user information (e.g. device number or
identifier); it can be up to 15 characters in length.
identifier); it can be up to 15 characters in length.
Setup Register
Description
Device Type
A device type identifier (“7300” for the 9300)
Compliance
A statement of whether the device is ION compliant or not
Options
Shows model number of meter
Revision
The meter’s firmware version
Serial Num
The meter’s serial number
ION Version
The ION version supported by the device
Template
The name of the factory default template (framework) installed on the device
Nom Freq
The expected frequency of the power system being monitored