Datalogic Scanning DS4600A User Manual

DS4600A 

 
Power can be supplied to the scanner through the pins provided on the 25-pin 
connector used for communication with the host (Figure 6): 
 
 

VS 

GND 

CHASSIS 

Earth Ground

CHASSIS

GND 

V+  (10 - 30 Vdc) 

 

 
or through the jack connector on the side of the 25-pin connector for connections to a 
UL Listed Direct Plug-in Power Unit (Figure 7). If the jack input is used to supply 
power to the DS4600A, pin 13 is automatically disconnected; the supply voltage for 
the external trigger remains on pin 9. The plug connector is not supplied with the 
DS4600A. 
 
 

 

 
For Standard models, the power must be between 10 and 30 Vdc only. There is a 
current peak of about 1A at 10 V during power on caused by the motor starting. 
 
For Integrated Heater models, the power must be 24Vdc only. 
 
It is recommended to connect pin 1 (CHASSIS) to a common earth ground.