Panasonic UF-7200 User Manual

Problem Solving

When a problem occurs, the display may show one of the Information Codes listed below. These will help
you to identify and correct the problem.

Information Code

Info.

Code

Meaning

Possible Action

Page

030

Document is misfeeding.

1.Reload the document properly.

2.Remove the document jam.

46,47,
48,49
51

031

Document is too long or jammed.
Document length exceeds 39.4 inches (1000 mm).
The length limitation for 600 dpi, is subject to the
available Memory size.
600dpi
(Max. Length is 24 inches (600 mm))

1.Reload the document properly.

2.Remove the document jam.

46,47,
48,49
51

061

ADF Cover is open.

Close the ADF Cover.

400

During initial connection, receiving station did not
respond or communication error occurred.

1.Check with the other party.
2.Reload the document and send
again.

402

During initial connection, communication error
occurred.

Reload the document and send
again.

403

No polling capability at the remote side.

Ask remote side to set
“POLLED=ON”.

404/405

During initial connection, communication error
occurred.

Reload the document and send
again.

406

Transmission Password does not match.
Receiving Password does not match.
Received from an unauthorized station in Selective
Reception mode.

Check the password or the telephone
number in One-Touch or ABBR.
station.

407

No confirmation from the receiving station for the
previous page sent.

Wait a few minutes and send again.

408/409

Remote side confirms previous page(s) is (are)
illegible.

Wait a few minutes and send again.

410

Communication aborted by the transmitting side.

Check with the other party.

411

Polling password does not match.

Check the polling password.

412

No data from the transmitting side.

Check with the other party.

414

Polling password does not match.

Check the polling password.

415

Polling transmission error.

Check the polling password.

416/
417/
418/419

Received data has too many errors.

Check with the other party.

420/421

Machine goes to receiving mode, but receives no
command from the transmitting side.

1.Remote side misdial.
2.Check with the other party.

422/427

Interface is incompatible.

Check with the other party.

430/434

Communication error occurred while receiving.

Check with the other party.

436/490

Received data has too many errors.

Check with the other party.

NOTE

1. After identifying the problem and taking the recommended action, if the Information Codes keep occurring or if Information

Codes that are not listed in the above table appear, please contact your local Panasonic Authorized Dealer.