Panasonic UF-7200 User Manual

54

1

715

TCP/IP connection timed out.

Check the Internet Fax Parameter 
settings. Verify the IP Address, Default 
Gateway IP Address, SMTP Server IP 
Address.

--

716

Cannot log on to the designated SMTP Server.

Check the SMTP Server IP Address 
setting. Contact the Network 
Administrator.

--

717

Incomplete SMTP Protocol transmission. SMTP 
Server's hard disk may be full.

SMTP Server is defective.
Contact the Network Administrator.

--

718

Page Memory Overflow occurred while receiving 
printing data. The paper size selected within your 
application to print is larger than the paper size 
loaded in the Paper Tray(s).

Check the document size and 
resolution.
Ask sender to resend in a supported 
size and resolution.

--

719

Received data via LAN is in a format that is not 
supported.

Ask the originator to resend with a 
supported file attachment format:
* In a TIFF format.
* Image data equivalent to recording 

paper size.

--

720

Cannot connect to the POP Server (Incorrect POP 
Server IP Address). POP Server is down.

Check the POP Server IP Address.
Contact the Network Administrator.

--

721

Cannot connect to the POP Server. (User Name or 
Password error)

Check the POP User Name and 
Password or the APOP settings.
Contact the Network Administrator.

--

722

Failed to obtain IP address from the DHCP Server.

Check the 10Base-T/100Base-TX cable 
connection.
Confirm that the Internet Parameter and 
the DHCP Server are correctly 
configured before plugging or 
unplugging the power cord of the 
machine from the wall outlet.
Contact the Network Administrator.

--

725

DNS Server connection timed out. DNS Server is 
down.

Check the DNS Server IP Address.
Contact the Network Administrator.

--

726

Received an error response from the DNS Server.

Check the POP Server Name.
Check the SMTP Server Name.

--

728

The document was sent to the Internet Fax in an 
incompatible file format (PDF). TIFF file format is 
required for Internet Fax.
PDF file format is only used when using the Scan-to-
Email feature.

Change the Fax Parameter No.177 
(XMT FILE TYPE) to "TIFF".
(Refer to the Fax Parameter in the 
Operating Instructions (For Advanced 
Operations) on the provided CD-ROM.)

--

729

Failed to authenticate (SMTP Authentication) when 
connecting with the SMTP Server.

Check the SMTP Authentication. User 
Name and Password.
Contact the Network Administrator.

--

730

Cannot retrieve the Journal nor program the Internet 
Parameters and the Auto Dialer remotely via Email 
from a PC.

Check that the Fax Parameter No. 158 
(PC REMOTE UPDATE) is set to 
“2:Valid”.

--

731

The dialer buffer for manual dialing was full (50 
stations) when the Relay Transmission Request was 
received.

Request the sender to resend the Relay 
Transmission Request after the 
reserved communication is finished.

--

NOTE