Panasonic KX-FHD332 User Manual

Page of 92
Frequently Asked Questions
68
For Fax Advantage assistance, call 1-800-435-7329.
L Try copying the document. If the copied 
image is clear, there may be something 
wrong with the other party’s machine.
The other party complains that smudges or 
black lines appear on their received 
document.
L The glass or rollers are dirty. Clean them 
(page 76).
I cannot send a fax overseas.
L Use the overseas transmission mode of 
feature #23 (page 61).
L Add two pauses at the end of the telephone 
number or dial manually.
Fax – receiving
I cannot receive documents.
L The telephone line cord is connected to the 
EXT jack on the unit. Connect to the LINE 
jack (page 15).
L When you have a single telephone line and 
subscribe to a voice mail service, you must 
also subscribe to a Distinctive Ring service 
(page 53).
I cannot receive documents automatically.
L The receiving mode is set to TEL mode. Set 
to FAX ONLY mode by pressing 
{RECEIVE MODE}.
L The time taken to answer the call is too long. 
Decrease the number of rings of feature #06 
(page 60).
The display shows the following, but faxes 
are not received.
CONNECTING.....
L The incoming call is not a fax. Change the 
receiving mode to TEL mode by pressing 
{RECEIVE MODE}.
A blank sheet is ejected.
L If a blank sheet is ejected after the received 
document is printed out, the receiving 
reduction rate is not programmed correctly. 
Program the proper rate in feature #36 (page 
62).
L The other party placed the document in their 
fax machine the wrong way. Check with the 
other party.
A white line or a smudge appears on your 
recording paper.
L The glass or rollers are dirty. Clean them 
(page 76).
The printing quality is poor.
Note:
Please do not reuse the ink film!
For best results, use genuine Panasonic 
replacement film. Refer to page 7 for further 
details.
L The other party sent a faint document. Ask 
them to send a clearer copy of the document.
L The thermal head is dirty. Clean it (page 77).
L Some paper has instructions recommending 
which side to print on. Try turning the paper 
over.
L You may have used paper with a cotton 
and/or fiber content that is over 20%, such as 
letterhead or resume paper. We recommend 
smooth paper such as “Hammermill Jet Print” 
for clearer printing.
The other party complains that they cannot 
send a document.
L The memory is full of received documents 
due to a lack of recording paper or a 
recording paper jam. Install paper (page 14) 
or clear the jammed paper (page 72).
Receiving mode
I cannot select the desired receiving mode.
L If you want to set FAX ONLY mode, press 
{RECEIVE MODE} repeatedly until FAX 
ONLY mode is displayed.
L If you want to set TEL mode, press 
{RECEIVE MODE} repeatedly until TEL 
mode is displayed.
L The Distinctive Ring of feature #31 is 
activated (page 53).