Panasonic KX-MB2060 User Manual

R The dialing mode setting may be wrong. Change the setting (feature #120

R The cordless handset is too far from the base unit. Move closer and try again

(KX-MB2060 optional).

R Another unit is in use. Wait and try again later.
R Answering machine is being used. Wait and try again later.

R The ringer volume is turned OFF. Adjust it (page 27).

R FAX ONLY mode is set (page 63). Tell the other party the number is only

used for faxes.

R Change the receiving mode to TEL mode (page 64) or TAM/FAX mode

R If you use a Distinctive Ring service, make sure you have set the same ring

The MRedialN or MPauseN
button on the base unit does
not function properly.

R If this button is pressed during dialing, a pause will be inserted. If pressed

immediately after a dial tone is obtained, the last number dialed will be
redialed.

R Distinctive Ring is set (feature #430 on page 68).

R You are probably entering MGN MBN M9N. This is the default setting for the

fax activation code. If you use a voice mail service, turn the fax activation
feature OFF or reprogram the activation code (feature #434 on page 85).

R The cordless handset is too far from the base unit.

R Make sure the following features are set beforehand.

– PC fax reception (feature #442 on page 86)
– Computer setting for the PC fax reception (feature #443 on page 30)

R Make sure the following features are set beforehand.

– Fax preview mode (feature #448 on page 66)
– Web fax preview access code (feature #450 on page 66)

R You cannot display a received fax document on the web browser during

printing, copying or scanning. Try again after printing, copying or scanning.

R View, print or save a received fax document before erasing (page 66).

For assistance, please visit http://www.panasonic.com/help

119