Samson AURO3 User Manual

10

ENGLISH

You can flush-mount the Auro Series 
speakers on a wall using the includ-
ed ABS plastic mounting bracket. 
You can position the Auro speaker 
either vertically or horizontally us-
ing the flush mount bracket. 

In figure 2 you can see the instal-
lation for an Auro series speaker 
mounted in the vertical position.  
Follow the steps below to hang your 
speaker.

IMPORTANT NOTE: Only licensed 
and insured professional sound 
contractors should install the Auro 
Speaker using the flush-mount instal-
lation brackets. Samson assumes no 
liability for any installation. 

•  Remove the ABS plastic insert on the top and bottom of the Auro speaker.

•   Slide the flush-mount brackets into the bracket channel, but don’t screw 

them in at this point.

•  Hold the speaker in place and mark the holds for the mounting brackets.

•   Now, remove the flush-mount brackets from the speaker and attach them 

to the wall using the appropriate hardware, suitable for the building mate-
rial you are mounting on.

•   Slide the Auro speaker into the flush-mount bracket keeping the sliding 

bracket inside the top and bottom bracket channels.

•   Insert the thumbscrews through the mounting bracket and into the thread-

ed inserts, and then tighten the thumbscrews all the way. 

Important Note: Be careful to insert the thumbscrews straight and do not cross-
thread the thumbscrews.

Figure 2