Fujitsu DX8100 S2 User Manual
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED
P2X0-1090-10ENZ0
611
2
Select the FC port bandwidth limit, and click the [Set] button.
•
Bandwidth Limit
Select the maximum performance in IOPS (throughput value). If the bandwidth limit is not applied,
select "Unlimited".
Select the maximum performance in IOPS (throughput value). If the bandwidth limit is not applied,
select "Unlimited".
→ A confirmation screen appears.
3
Click the [OK] button.
→ The FC port QoS setting starts.
4
Click the [Done] button to return to the [FC Port QoS] screen.
End of procedure
9.2.7.10
Set iSCSI Port QoS
This function specifies the bandwidth limit (maximum performance limit) for the iSCSI port.
•
The bandwidth limit can be configured only for the ports in the port mode of "CA" or "CA/RA". For the ports
in the port mode of "RA", the bandwidth limit cannot be specified.
in the port mode of "RA", the bandwidth limit cannot be specified.
•
If the port mode has been changed from "CA" or "CA/RA" to "RA", the bandwidth limit returns to the
default value.
default value.
•
This function can be used, irrespective of whether the Host-LU QoS is enabled or disabled. However, if the
Host-LU QoS has been disabled, the host starts operating within the configured bandwidth limit after the
Host-LU QoS is enabled.
Host-LU QoS has been disabled, the host starts operating within the configured bandwidth limit after the
Host-LU QoS is enabled.