Fujitsu DX8100 S2 User Manual
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED
P2X0-1090-10ENZ0
612
The procedure to set the iSCSI port QoS is as follows:
Procedure
1
Select the iSCSI port to set the bandwidth limit (multiple selections can be made), and click
[Set iSCSI Port QoS] in [Action].
[Set iSCSI Port QoS] in [Action].
2
Select the iSCSI port bandwidth limit, and click the [Set] button.
•
Bandwidth Limit
Select the maximum performance in IOPS (throughput value). If the bandwidth limit is not applied,
select "Unlimited".
Select the maximum performance in IOPS (throughput value). If the bandwidth limit is not applied,
select "Unlimited".
→ A confirmation screen appears.
3
Click the [OK] button.
→ The iSCSI port QoS setting starts.
•
Configure the port bandwidth limit on each host. Refer to the following sections for details:
- "9.2.7.6 Set FC/FCoE Host QoS" (page 605)
- "9.2.7.7 Set iSCSI Host QoS" (page 607)
- "9.2.7.8 Set SAS Host QoS" (page 608)
- "9.2.7.7 Set iSCSI Host QoS" (page 607)
- "9.2.7.8 Set SAS Host QoS" (page 608)
•
for details.