GE GFK-1918D User Manual
G E F a n u c P L C Ta r g e t s
Configuring Communication
30
CIMPLICITY Logic Developer - PLC Version 4.00
GFK-1918D
3
To set a per ma nent I P a d dr ess fo r a PA CS ys tem s™ R X7 i
1.
In the
Project tab of the
Navigator, right-click the
target and choose Properties.
The
Inspector displays the target’s properties.
2.
In the IP Address property, enter an IP address.
3.
Download the hardware configuration to the PACSystems™ RX7i. For more information, see page 35.
Note: Ensure that you have configured the rest of the hardware configuration
before downloading it.
before downloading it.
C o n f i g u r i n g C o m m u n i c a t i o n f o r n o n - P A C S y s t e m s ™ P L C s
To set an I P a d dr ess fo r S eri es 9 0™ - 70 PL Cs
1.
In the
Project tab of the
Navigator, expand the
Hardware Configuration node.
2.
Expand the
Main Rack and double-click the slot where you want to add a communications module.
The Module Catalog appears.
3.
Choose the Communications tab and select the communications module you want to add.
Select either IC697CMM741 or IC697CMM742.
4.
Click OK.
The Parameter editor opens showing the configuration settings for the module.
5.
In the Settings tab, double-click the IP Address parameter.
Want to know more? In the Help Index, look up “Configuring communication with a
PACSystems™ RX7i” and “Set Temporary IP Address utility”.