Lucent Technologies partner voice messaging card User Manual
If you entered a mailbox number in Step 3:
The system plays:
Reinitialized.
4 .
Press [
*
] [
*
] [
9
] to quit, or hang up.
Reinitializing a Password
If a subscriber forgets the password for his or her mailbox, you can reinitialize
the password to the factory setting of 1234 so the user can retrieve messages.
Remind the subscriber to change the password immediately after logging in
for the first time.
✏
NOTE:
You cannot use this procedure to reinitialize the System Manager's
password for mailbox 0. If you change the System Manager's password
and forget it, you can contact the National Customer Care Center at
1 800 628-2888 or call your Lucent Technologies Representative
password for mailbox 0. If you change the System Manager's password
and forget it, you can contact the National Customer Care Center at
1 800 628-2888 or call your Lucent Technologies Representative
or
local Authorized Dealer for instructions for how to reset the password.
To reinitialize a password to 1234:
1 .
2 .
3 .
If necessary, access the Programming Main Menu. If you are already at
the Programming Main Menu, skip to Step 2.
the Programming Main Menu, skip to Step 2.
A ) Call PARTNER Voice Messaging:
■
If calling internally, press [
Intercom
] [
7
] [
7
] [
7
] or the programmed
■
If calling from outside the system, press [
*
] [
R
] ([
*
] [
7
]) during the
general mailbox greeting.
B ) Enter [
0
] followed by the password for mailbox 0.
Press [
9
] followed by the mailbox number to reinitialize a password. The
system plays:
The password has been reinitialized.
Press [
*
] [
*
] [
9
] or hang up to quit.