Lucent Technologies partner voice messaging card User Manual
3.
4.
5.
Enter four digits for the new password.
The prompt asks you to re-enter your new password.
Re-enter your new password.
The new password is now active.
Press [
*
] [
R
] ([
*
] [
7
]) to return to the Programming Main Menu or press
[
*
] [
*
] [
9
] to exit programming, or hang up.
Reinitializing a Mailbox
To prepare a previously used mailbox for a new subscriber, you can reinitialize
the mailbox. This procedure deletes any messages left in the mailbox and
turns off the phone's message light (if on), erases the personal greeting (if
the mailbox. This procedure deletes any messages left in the mailbox and
turns off the phone's message light (if on), erases the personal greeting (if
recorded), and changes the password back to the factory setting (1234).
To reinitialize a mailbox:
1.
If necessary, access the Programming Main Menu. If you are already at
the Programming Main Menu, skip to Step 2.
A) Call PARTNER Voice Messaging:
■
If calling internally, press [
Intercom
] [
7
] [
7
] [
7
] or the programmed
VMMsgs button.
■
If calling from outside the system, press [
*
] [
R
] ([
*
] [
7
]) during the
general mailbox greeting.
B ) Enter [
0
] followed by the password for mailbox 0.
2.
Press [
6
] to initialize mailboxes.
The system plays:
Caution: Initializing a mailbox erases its greeting and messages.
To exit without making any changes, press [
*
] [
7
].
3 .
Do one of the following:
■
Enter the number of the mailbox you want to initialize.
■
Press [
*
] [
R
] ([
*
] [
7
]) to return to the Programming Main Menu without
making changes.