Lucent Technologies partner voice messaging card User Manual
5.
At this point, do one of the following:
■
Go to Step 3 of the next procedure to program another button for this
extension.
extension.
■
Press [
Central Tel Program
] and go to Step 2 of any button programming
procedure in this section to program a button for a different extension.
■
Press [
Feature
] [
0
] [
0
] to exit.
Do Not Disturb (F01)
Used in conjunction with either automatic VMS cover or manual VMS cover,
this button lets a subscriber send calls immediately to his or her mailbox
(instead of ringing the extension first).
this button lets a subscriber send calls immediately to his or her mailbox
(instead of ringing the extension first).
To program a Do Not Disturb (DND) button as specified on Form C:
1.
2.
3.
4.
5.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
Central Tel Program
].
Enter the number of the extension to be programmed.
Press a programmable button with lights.
Press [
Feature
] [
0
] [
1
].
At this point, do one of the following:
■
Go to Step 3 of the next procedure to program another button for this
extension.
extension.
■
Press [
Central Tel Program
] and go to Step 2 of any button programming
procedure in this section to program a button for a different extension.
■
Press [
Feature
] [
0
] [
0
] to exit.
Voice Mailbox Transfer (F14)
This button lets any system user transfer calls directly to PARTNER Voice
Messaging without ringing the extension first.
To program a Voice Mailbox Transfer (VMBox) button as specified on Form C:
1.
2.
3.
4.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
Central Tel Program
].
Enter the number of the extension to be programmed.
Press a programmable button.
Press [
Feature
] [
1
] [
4
].