Multi-Tech Systems MTCBA-E-EN User Manual

Chapter 3 – Using the Web Management Software 

Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375F) 

 

 

 

The Power-On Configuration feature allows you to set an initialization string that will be sent to the modem upon boot 
up.   

 

  You can enter a string of 0 to 40 characters that will be sent to the modem upon 

boot up. All commands will initialize before you proceed with regular PPP related 

activity. 

 When no initialization string is configured, regular functionality of the modem 

is retained. 

Click the SUBMIT button to save this setting.  

You must click Save and Restart once you have completed and submitted 

all the screens on which you have made changes. 

 
 

Setting up certain modem commands will allow an external application to query modem information (based on the 
commands entered). The application can use the URL 

HTTP://192.168.2.1/modeminfo.html

 to get the IP address that 

is currently assigned to the wireless modem after the PPP connection is established. It also will show the results of up 

to ten AT commands entered here.   

 

 

These commands will be sent every time a PPP connection to the network is initiated. 

Product Serial Number 

Software Version   

Wireless Subscriber Number 

Network Information (Operator)  

Network Registration 

Signal Quality 

• 

You can also retrieve the modem information without using a browser: 
Make a TCP connection to port 80 (same as the Web Admin port) and send data as:  

Then press Enter twice. 

• 

See the GPRS AT Command Reference Guide (Number S000293x) for other commands.