APC Command Line Interface User Manual

list

When the administrator or device 

manager (device-only user) uses the command:

• If the current user was authenticated by 

RADIUS, the output lists all RADIUS-defined 
users, all users in the local database, and the 
outlets assigned to each through RADIUS.

• If the current user was not authenticated by 

RADIUS, the output lists only the users in the 
local database and the outlet numbers assigned 
to each through the CLI or the Switched Rack 
PDU user interface.

When the current user is an outlet user, the output 
lists only that user and the user’s assigned outlets, 
defined by the method that authenticated that user.

Administrator, device manager, and 

outlet user.

None.

OK
user: outlet_number, outlet_number...

In the following example, the current user (the 
administrator) and the outlet user were 
authenticated through the local database.

OK
Local: admin: 1,2,3,4,5,6,7,8
Local: carlos_sanchez: 1,5,6,7

In the following example, the current user (an 
outlet user) was authenticated through the local 
database.

OK
Local: carlos_sanchez: 1,5,6,7

In the following example, the current user (an 
outlet user) was authenticated through RADIUS.

OK
Radius: VSAOutlet: 1,2,3

In the following example, the current user (the 
device manager) was authenticated through 
RADIUS, and the outlet user was authenticated 
through the local database.

OK
Local: device: 1,2,3,4,5,6,7,8
Radius: RadDevice: 1,2,3,4,5,6,7,8
Local: ingrid_kohl: 1,5,6,7

E101