APC Command Line Interface User Manual

overloadrestriction [phase_number]

overloadrestriction phase_number setting

When the overload restriction is set 

to on, the command prevents outlets from turning 
on while the overload alarm threshold is violated. 

• To read the current setting, omit setting in the 

command line.

• To change the current setting, include the 

phase number and the new value for setting 
(on or off) in the command line.

Administrator and device manager 

(device-only user).

OK
Overload restriction is setting for phase_number.

OK
Setting overload for phase_number to setting.

E101, E104

phase_number  The number (1, 2, or 3) of the phase 

whose overload restriction setting you 

want to read or set. If you omit the 

phase number when reading the 

setting, the command by default reads 

the setting for phase 1.

setting 

The available settings, on and off, are 

not case-sensitive.