Socket Mobile IB810 User Manual

 
Video Off Method 
This field defines the Video Off features. There are three options. 

V/H SYNC + Blank 

Default setting, blank the screen and turn off 
vertical and horizontal scanning. 

DPMS 

Allows BIOS to control the video display. 

Blank Screen 

Writes blanks to the video buffer. 

  

 

Video Off In Suspend  
When enabled, the video is off in suspend mode. The default setting is 
Yes. 

 

Suspend Type  
The default setting for the Suspend Type field is Stop Grant. 

 

Modem Use IRQ  
This field sets the IRQ used by the Modem. By default, the setting is 3. 

 

Suspend Mode 
When enabled, and after the set time of system inactivity, all devices 
except the CPU will be shut off. 

 

HDD Power Down 
When enabled, and after the set time of system inactivity, the hard disk 
drive will be powered down while all other devices remain active. 

  

Soft-Off by PWRBTN 
This field defines the power-off mode when using an ATX power supply. 
The Instant Off mode allows powering off immediately upon pressing the 
power button. In the Delay 4 Sec mode, the system powers off when the 
power button is pressed for more than four seconds or enters the suspend 
mode when pressed for less than 4 seconds.  

 

Wake-Up by PCI Cards  
Enable this field to allow wake up function through a PCI card.  

 

Power On by Ring  
This field enables or  disables the power on of the system through the 
modem connected to the serial port or LAN. 

 

Resume by Alarm 
This field enables or disables the resumption of the system operation. 
When enabled, the user is allowed to set the Date and Time.