Socket Mobile IB810 User Manual

Page of 78
BIOS SETUP 
                         IB810 User’s Manual 
47 
 
PNP/PCI Configurations  
This option configures the PCI bus system. All PCI bus systems on the 
system use INT#, thus all installed PCI cards must be set to this value.  
 
CMOS Setup Utility – Copyright © 1984-2001 Award Software  
PnP/PCI Configurations 
PNP OS Install 
No 
ITEM HELP 
Reset Configuration Data 
Disabled 
 
 
Resources Controlled By 
Auto (ESCD) 
IRQ Resources 
Press Enter 
DMA Resources 
Press Enter 
 
 
PCI/VGA Palette Snoop 
Disabled 
 
 
 
 
 
 
 
 
 
 
 
 
Menu Level 
 
Default is Disabled. 
Select Enabled to 
reset Extended 
System Configuration 
Data (ESCD) when you 
exit Setup if you have 
installed a new add-on 
and the system 
reconfiguration has 
caused such a serious 
conflict that the OS 
cannot boot 
 
 
 
 
 
PNP OS Install 
Enable the PNP OS Install option if it is supported by the operating 
system installed. The default value is No. 
 
Reset Configuration Data 
This field allows you to determine whether to reset the configuration data 
or not. The default value is Disabled. 
 
Resources Controlled by 
This PnP BIOS can configure all of the boot and compatible devices 
automatically with the use of a use a PnP operating system such as 
Windows 95. 
  
PCI/VGA Palette Snoop 
Some non-standard VGA display cards may not show colors properly. 
This field allows you to set whether or not MPEG ISA/VESA VGA cards 
can work with PCI/VGA. When this field is enabled, a PCI/VGA can 
work with an MPEG ISA/VESA VGA card. When this field is disabled, a 
PCI/VGA cannot work with an MPEG ISA/VESA card.