Nortel Networks 1005r User Manual
RAID operations
Standard 1.10
152
CallPilot
Requirements
Phillips (cross head) screwdriver, #1 and #2 bit
RAID card replacement kit
electrostatic discharge (ESD) grounding strap
To replace the RAID card
1
Power down the server, unplug all peripheral devices and ethernet
cables, and disconnect the AC power.
cables, and disconnect the AC power.
2
Attach the ESD strap to your wrist and attach the other end to a
grounded connection away from the server.
grounded connection away from the server.
3
Remove the chassis cover. Refer to “Removing and replacing the
server cover” on page 108 for instructions.
server cover” on page 108 for instructions.
4
Disconnect the red power cable from the PCI riser assembly.
5
Disconnect the DS30X cable from the MPB96 card in the full-size
side of the PCI riser.
side of the PCI riser.