Siemens SX541 WLAN dsl User Manual
46
Configuring the Local Network
Gigaset SX541 WLAN dsl / englisch / A31008-M1025-L101-1-7619 / configure_tcpip.fm / 21.07.2005
Sc
hablone 2005_05_02
Synchronising the TCP/IP Settings with the Gigaset SX541 WLAN dsl
You have now configured your PC so that it is ready to be connected to the Gigaset
SX541 WLAN dsl. You now have to release the old TCP/IP settings and synchronise them
with the settings of your Gigaset SX541 WLAN dsl.
SX541 WLAN dsl. You now have to release the old TCP/IP settings and synchronise them
with the settings of your Gigaset SX541 WLAN dsl.
ì
Click Start – Run.
ì
Type WINIPCFG and click OK.
There may be a slight delay before the IP Configuration window appears.
ì
Select your network adapter from the selection list.
ì
Click Release and then on Update.
If the default IP address (192.168.2.1) of the Gigaset SX541 WLAN dsl was not
changed, the IP address should now read 192.168.2.x (with x being a number
between 2 and 255). The Subnet Mask must always be 255.255.255.0 and the
Standard Gateway must have the IP address of the Gigaset SX541 WLAN dsl
(192.168.2.1). These values confirm that your Gigaset SX541 WLAN dsl is working.
If the default IP address (192.168.2.1) of the Gigaset SX541 WLAN dsl was not
changed, the IP address should now read 192.168.2.x (with x being a number
between 2 and 255). The Subnet Mask must always be 255.255.255.0 and the
Standard Gateway must have the IP address of the Gigaset SX541 WLAN dsl
(192.168.2.1). These values confirm that your Gigaset SX541 WLAN dsl is working.
ì
Click OK to close the IP Configuration window.