Enterasys Networks 1H582-xx User Manual
Preparing the Device for Router Mode
Enabling Router Configuration Modes
3-97
Key Chain
Configuration
Mode
Configuration
Mode
Set protocol (RIP)
authentication key
parameters.
authentication key
parameters.
Type
key chain
and the key chain
name
name
from Router
(RIP)
Configuration
mode.
Configuration
mode.
Matrix>Router
(config-keychain)#
(config-keychain)#
Key Chain Key
Configuration
Mode
Configuration
Mode
Configure a specific
key within a RIP
authentication key
chain.
key within a RIP
authentication key
chain.
Type
key
and the
key-id from Key
Chain
Configuration
Mode.
Chain
Configuration
Mode.
Matrix>Router
(config-keychain-key)#
(config-keychain-key)#
NOTE: To jump to a lower configuration mode, type exit at the command prompt. To
revert back to switch mode, type exit from Privileged EXEC router mode.
revert back to switch mode, type exit from Privileged EXEC router mode.
Table 3-10
Router CLI Configuration Modes (Continued)
Use this mode...
To...
Access method...
Prompt...