Enterasys Networks 1H582-xx User Manual

Matrix>set spantree portadmin fe.0.1 disable

Matrix>set vlan create 10

Matrix>set port vlan fe.0.1 10

The PVID is used to classify untagged frames as they ingress into a given port. 

Would you like to add the selected port(s) to this vlan's untagged egress list 

and remove them from all other vlans untagged egress list(y/n) 

[

n

]

?

NOTE: choosing 'y' will not remove the port(s) from previously configured 

tagged egress lists

. 

Matrix>clear vlan egress 10 fe.0.1

Matrix>

Matrix>set vlan egress 10 fe.0.1 untagged

Matrix>set gvrp disable fe.0.1

Matrix>set spantree portadmin fe.0.2 disable

Matrix>set vlan create 20

Matrix>set port vlan fe.0.2 20

The PVID is used to classify untagged frames as they ingress into a given port. 

Would you like to add the selected port(s) to this vlan's untagged egress list 

and remove them from all other vlans untagged egress list(y/n) 

[

n

]

?

NOTE: choosing 'y' will not remove the port(s) from previously

configured tagged egress lists

. 

Matrix>clear vlan egress 20 fe.0.2

Matrix>

Matrix>set vlan egress 20 fe.0.2 untagged

Matrix>set gvrp disable fe.0.2

Matrix>router

Entering Router mode. 

Matrix>Router#configure terminal

Enter configuration commands: 

Matrix>Router(config)#interface vlan 10

Matrix>Router(config-if(Vlan 10))#ip address 182.127.63.1 255.255.255.0

Matrix>Router(config-if(Vlan 10))#no shutdown

Matrix>Router(config-if(Vlan 10))#exit

Matrix>Router(config)#interface vlan 20

Matrix>Router(config-if(Vlan 20))#ip address 182.127.62.1 255.255.255.0

Matrix>Router(config-if(Vlan 20))#no shutdown

Matrix>Router(config-if(Vlan 20))#exit

Matrix>Router(config)#exit

Matrix>Router#write file filename startup.cfg

Saving information to startup.cfg...done

Matrix>Router#