Enterasys Networks 1H582-xx User Manual

This example shows how to display trunking information when the device is in port trunking mode:

This example shows how to display trunking information for trunk2 when the device is in port 
trunking mode:

 provides an explanation of the command output.

Matrix>show trunk 

Device is in portTrunking mode.

Trunking algorithm is round robin.

trunkName: newtrunk1 Admin Status: enabled Oper Status: up

trunkName: trunk2 Admin Status: disabled Oper Status: down

Matrix>show trunk trunk2

trunk port: fe.0.10

trunk port fe.0.11

trunk port fe.0.12

Device is in...

Trunking mode of the device. Default of 802.3ad can be 
changed using the set trunkmode command 
(

Trunking 
algorithm is...

Whether the trunking algorithm is round robin (default) or 
MAC hashing. Default can be changed using the set trunk 
algorithm command (

trunkName

Name and status of trunk(s) configured in port trunking 
mode.

LACP Rx/Tx

(Displayed in 802.3ad mode only.) Whether LACP is 
enabled or disabled. Default (enabled) can be changed using 
the set lacp command (

).

System Identifier

(Displayed in 802.3ad mode only.) Device MAC address. 

Agg

(Displayed in 802.3ad mode only.) Link Aggregation Group 
designations. Statically formed LAGs are indicated with an 
“S” preceding the aggregator name.