Enterasys Networks 1H582-xx User Manual

To assign or remove ports on the VLAN egress list for the device. This determines which ports will 
transmit frames of a particular VLAN. For example, ports 1, 5, 9, 8 could be assigned to transmit 
frames with VLAN ID=5. 

The port egress type for all ports defaults to tagging transmitted frames, but can be changed to 
forbidden or untagged. Setting a port to forbidden prevents it from participating in the specified 
VLAN and ensures that any dynamic requests (either through GVRP or dynamic egress) for the port 
to join the VLAN will be ignored. Setting a port to untagged allows it to transmit frames without a 
tag header. This setting is usually used to configure a port connected to an end user device.

The commands used to configure VLAN egress and dynamic VLAN egress are listed below and 
described in the associated section as shown.

show port egress (

)

)

clear vlan egress (

show vlan dynamicegress (

)

set vlan dynamicegress (

)

Use this command to prevent one or more ports from participating in a VLAN. This setting instructs 
the device to ignore dynamic requests (either through GVRP or dynamic egress) for the port to join 
the VLAN.

set vlan forbidden vlan-id port-string