Enterasys Networks 1H582-xx User Manual
IP Configuration Command Set
Configuring Broadcast Settings
12-22
12.2.4 Configuring Broadcast Settings
Purpose
To configure IP broadcast settings.
Commands
The commands needed to configure IP broadcast settings are listed below and described in the
associated section as shown:
associated section as shown:
•
ip directed-broadcast (
)
•
ip helper-address (
)
•
ip forward-protocol (
)
12.2.4.1 ip directed-broadcast
Use this command to enable or disable IP directed broadcasts on an interface.
ip directed-broadcast
Syntax Description
None.
Command Syntax of the “no” Form
The “no” form of this command disables IP directed broadcast globally:
no ip directed-broadcast
Command Type
Router command.
Command Mode
Interface configuration: Matrix>Router(config-if(Vlan <vlan_id>))#
Command Defaults
None.