Enterasys Networks 1H582-xx User Manual

This example shows how to set the RIP receive version to 2 for update packets received on VLAN 1:

The following tasks must be completed to configure RIP authentication on the Matrix E1 device: 

1. Create a key chain as described in 

.

2. Add a key to the chain as described in 

3. Specify an authentication string for the key as described in 

4. Set the time periods the authentication string can be received and sent as valid as described in 

 and 

.

5. Enable a key chain for use on an interface as described in 

6. Specify an authentication mode as described in 

.

Creates or deletes a key chain used globally for RIP authentication.

key chain name

The “no” form of this command deletes the specified key chain:

no key chain name

Router command.

Global configuration: Matrix>Router(config)#

Matrix>Router(config)#interface vlan 1

Matrix>Router(config-if(Vlan 1))#ip rip receive version 2

Specifies a name for the key chain.