Enterasys Networks 1H582-xx User Manual
Security Configuration Command Set
Configuring RADIUS
14-10
14.3.1.4 show radius accounting
Use this command to display the RADIUS accounting configuration. This transmits accounting
information between a network access server and a shared accounting server.
information between a network access server and a shared accounting server.
show radius accounting [server [index] | counter [index] | retries [index] |
timeout [index] | intervalminimum | updateinterval]
timeout [index] | intervalminimum | updateinterval]
Syntax Description
Command Type
Switch command.
Command Mode
Read-Only.
Command Defaults
If no parameters are specified, all RADIUS accounting configuration information
will be displayed.
will be displayed.
server index
(Optional) Displays one or all RADIUS accounting server
configurations.
configurations.
counter index
(Optional) Displays counters for one or all active RADIUS
accounting servers.
accounting servers.
retries
(Optional) Displays the maximum number of attempts to
contact the RADIUS accounting server before timing out.
contact the RADIUS accounting server before timing out.
timeout
(Optional) Displays the maximum amount of time (in
seconds) to establish contact with the RADIUS accounting
server before timing out.
seconds) to establish contact with the RADIUS accounting
server before timing out.
intervalminimum
(Optional) Displays the minimum update interval setting.
This controls the frequency of RADIUS accounting
updates.
This controls the frequency of RADIUS accounting
updates.
updateinterval
(Optional) Displays the number of seconds between each
RADIUS accounting interim update (when accumulated
accounting data is sent to the server for a session.)
RADIUS accounting interim update (when accumulated
accounting data is sent to the server for a session.)