Enterasys Networks 1H582-xx User Manual

Use this command to configure RADIUS accounting. 

{[enable] [disable] 

[

server index ip_address port 

] 

[retries retries index] [timeout timeout index] [intervalminimum 

value] [updateinterval value]}

Switch command.

Read-Write.

enable | disable

Enables or disables the RADIUS accounting client.

server index 
ip_address port 
server-secret

Specifies the accounting server’s:

index number (1 - 2147483647)

IP address

UDP authentication port (0 - 65535)

(Read-Write password to access this 

accounting server. Device will prompt for this entry 
upon creating a server instance, as shown in the example 
below.)

retries retries 
index

Sets the maximum number of attempts to contact a 
specified RADIUS accounting server before timing out. 
Valid retry values are 1 - 2147483647.

timeout timeout 
index

Sets the maximum amount of time (in seconds) to establish 
contact with a specified RADIUS accounting server before 
timing out. Valid timeout values are 1 - 2147483647.

intervalminimum 
value

Sets the minimum interval at which RADIUS accounting 
will send interim updates. Valid values are 60 - 
2147483647.

updateinterval 
value

Sets the number of seconds between each RADIUS 
accounting interim update (when accumulated accounting 
data is sent to the server for a session.) Valid values are 180 
- 2147483647.