Enterasys Networks 2000 User Manual

You are unable to access the configuration 
commands in the CLI.

From the CLI, type enable to access Enable mode, 
then type configure to access Configure mode.

Configuration changes do not seem to be 
taking effect.

Use the procedure in Activating the Configuration 
Commands in the Scratchpad

 to 

activate the changes.

Configuration changes are not reinstated 
after a reboot.

Use the procedure in Saving the Active 
Configuration to the Startup Configuration File

 to save the configuration changes to the 

Startup configuration file.

The XP-2000 is not resolving DNS 
names.

Use the procedure in Setting the DNS Domain 
Name and Address

 to set up DNS.

If you have already performed this procedure, 
make sure you can use NS lookup on the DNS 
server to get the default domain. 

An SNMP manager cannot access the XP-
2000.

Use the procedure in Setting Up SNMP Community 
Strings

 to set up an SNMP community 

string and specify a target for SNMP traps.

If you have already performed this procedure, type 
snmp show all in the CLI to check the SNMP 
settings. 

Use the traceroute and ping commands to verify 
that the XP-2000 can reach the SNMP 
management station.

You are unable to ping a certain host.

Create and add an IP or IPX interface for the host. 
See the The TeraLink 2000 Series Library: User 
Reference for information.