Proxim AP-2500 User Manual
200
Using the Command Line Interface
Figure A-12 Results of “show wif” CLI command
Set WEP Encryption for each Wireless Interface
–
3 = wireless card in Slot A
–
4 = wireless card in Slot B
CAUTION
!
Client stations must have the same encryption key to be able to communicate with the AP-2500 device. Each
Wireless Interface can only support one Key Length (so each of the configured keys must have the same
length). The available key sizes vary based on card type. See
Wireless Interface can only support one Key Length (so each of the configured keys must have the same
length). The available key sizes vary based on card type. See
for more information.
For the wireless card in Slot A
You can set up to four encryption keys. This example describes setting encryption Key 1 on the wireless card in Slot A.
[Device Name]>set wifsec 3 encrypt enable encryptkey 1
<WEP key
(5-13 characters long depending on card type)> encryptkeytx 1
[Device Name]>show wifsec<CR>