Proxim AP-2500 User Manual

202

Using the Command Line Interface

Change your Wireless Interface Settings

Enable/Disable Interference Robustness

–

3 = wireless card in Slot A

–

4 = wireless card in Slot B

[Device Name]>set wif <3 or 4> interrobust <enable/disable>

This feature is only available for 802.11b wireless cards.

Enable/Disable Closed System

–

3 = wireless card in Slot A

–

4 = wireless card in Slot B

[Device Name]>set wif <3 or 4> closedsys <enable/disable>

NOTE

When disabled, a client configured with the Network Name “ANY” can connect to the AP-2500. This feature is
only available for 802.11b wireless cards.

Enable/Disable Load Balancing

–

3 = wireless card in Slot A

–

4 = wireless card in Slot B

[Device Name]>set wif <3 or 4> ldbalance <enable/disable>

This feature is only available for 802.11b wireless cards.

Enable/Disable Medium Density Distribution

–

3 = wireless card in Slot A

–

4 = wireless card in Slot B

[Device Name]>set wif <3 or 4> meddendistrib <enable/disable>

This feature is only available for 802.11b wireless cards.

Autochannel Select (ACS)

ACS is enabled by default. In order to disable ACS, disable the cards in slots A and B and reboot.
–

3 = wireless card in Slot A

–

4 = wireless card in Slot B

[Device Name]>set wif <3 or 4> autochannel disable

[Device Name]>reboot 0

Re-enable ACS

–

3 = wireless card in Slot A

–

4 = wireless card in Slot B

[Device Name]>set wif <3 or 4> autochannel enable

[Device Name]>reboot 0

Set the Distance Between APs

–

3 = wireless card in Slot A

–

4 = wireless card in Slot B

[Device Name]>set distaps <large, medium, small, minicell, microcell>

[Device Name]>reboot 0

This feature is only available for 802.11b wireless cards.