Rosewill RNWB-11001 User Manual

views all of the valid route entries in use. The Destination IP address, Subnet Mask, 

Gateway, and Interface will be displayed for each entry. 

 

Figure 4-57  System Routing Table 

¾

  Destination Network - The Destination Network is the address of the network or host 

to which the static route is assigned.   

¾

  Subnet Mask - The Subnet Mask determines which portion of an IP address is the 

network portion, and which portion is the host portion.   

¾

  Gateway - This is the IP address of the gateway device that allows for contact 

between the Router and the network or host.   

¾

  Interface - This interface tells you either the Destination IP Address is on the LAN & 

WLAN (internal wired and wireless networks), or on the WAN (Internet). 

 

Figure 4-58 The Bandwidth Control 

There are two submenus under the Bandwidth Control menu as shown in Figure 4-58. 

Click any of them, and you will be able to configure the corresponding function. The 

detailed explanations for each submenu are provided below. 

Choose menu “Bandwidth Control → Control Settings”, you can configure the Egress 

Bandwidth and Ingress Bandwidth in the next screen. Their values you configure should 

be less than 1000000Kbps. 

-92-