TP-LINK TL-WR340G User Manual

 

 

33

 

Figure 3-26 Add or Modify an Address Reservation Entry 

To modify or delete an existing entry: 

1. Click 

the 

Modify  in the entry you want to modify. If you want to delete the entry, click the 

Delete. 

2.  Modify the information.   

3. Click 

the 

Save button. 

Click the Enable All button to make all entries enabled 

Click the Disabled All button to make all entries disabled. 

Click the Delete All button to delete all entries 

Click the Next button to go to the next page and Click the Previous button to return the previous 

) 

The function won't take effect until the router reboots. 

 

Figure 3-27 The Forwarding menu 

There are four submenus under the Forwarding menu (shown in Figure 3-27): Virtual Servers, 

Port Triggering,  DMZ and UPnP. Click any of them, and you will be able to configure the 

corresponding function. The detailed explanations for each submenu are provided below. 

Virtual servers can be used for setting up public services on your LAN, such as DNS, Email and 

FTP. A virtual server is defined as a service port, and all requests from the Internet to this service 

port will be redirected to the computer specified by the server IP. Any PC that was used for a 

virtual server must have a static or reserved IP Address because its IP Address may change 

when using the DHCP function. You can set up virtual servers on this page, shown in Figure