TP-LINK tl-sl5428e User Manual

111

Figure

8-5 Port Config

The following entries are displayed on this screen:

Port Config

Port Select:

Click the Select button to quick-select the corresponding port
based on the port number you entered.

Select:

Select the desired port for IGMP Snooping feature configuration.
It is multi-optional.

Port:

Displays the port of the Switch.

IGMP Snooping:

Select Enable/Disable IGMP Snooping for the desired port.

Fast Leave:

Select Enable/Disable Fast Leave feature for the desired port. If
Fast Leave is enabled for a port, the Switch will immediately
remove this port from the multicast group upon receiving IGMP
leave messages.

LAG:

Displays the LAG number which the port belongs to.

Note:

1. Fast Leave on the port is effective only when the host supports IGMPv2 or IGMPv3.

2. When both Fast Leave feature and Unknown Multicast Discard feature are enabled, the

leaving of a user connected to a port owning multi-user will result in the other users
intermitting the multicast business.

8.1.3 VLAN Config

Multicast groups established by IGMP Snooping are based on VLANs. On this page you can
configure different IGMP parameters for different VLANs.