TP-LINK tl-sl5428e User Manual
112
Choose the menu Multicast→IGMP Snooping→VLAN Config to load the following page.
Figure
8-6 VLAN Config
The following entries are displayed on this screen:
¾
VLAN Config
VLAN ID:
Enter the VLAN ID to enable IGMP Snooping for the desired
VLAN.
VLAN.
Router Port Time:
Specify the aging time of the router port. Within this time, if the
switch doesn’t receive IGMP query message from the router port,
it will consider this port is not a router port any more.
switch doesn’t receive IGMP query message from the router port,
it will consider this port is not a router port any more.
Member Port Time:
Specify the aging time of the member port. Within this time, if the
switch doesn’t receive IGMP report message from the member
port, it will consider this port is not a member port any more.
switch doesn’t receive IGMP report message from the member
port, it will consider this port is not a member port any more.
Leave Time:
Specify the interval between the switch receiving a leave
message from a host and the switch removing the host from the
multicast groups.
message from a host and the switch removing the host from the
multicast groups.
Static Router Port:
Select the static router port which is mainly used in the network
with stable topology.
with stable topology.
¾
VLAN Table
VLAN ID Select:
Click the Select button to quick-select the corresponding VLAN
ID based on the ID number you entered.
ID based on the ID number you entered.