TP-LINK AC750 User Manual

 

- 9 - 

This chapter will show you how to configure the basic functions of your AC750 Wireless Dual 

Band Gigabit Router using Quick Setup Wizard within minutes. 

The default IP address of the router is 192.168.0.1 and the default Subnet Mask is 255.255.255.0. 

These values can be changed as you desire. In this guide, we use all the default values for 

description. 

Connect the local PC to the Ethernet ports of the router and then you can configure the IP address 

for your PC by the following method: Set up the TCP/IP Protocol in "Obtain an IP address 

automatically" mode on your PC. If you need instructions as to how to do this, please refer to 

. Then the built-in DHCP server will assign IP address for the PC. 

Now, you can run the Ping command in the command prompt to verify the network connection 

between your PC and the router. The following example is in Windows XP OS. 

Open a command prompt, and type ping 192.168.0.1, and then press Enter. 



  If the result displayed is similar to the Figure 3-1, it means the connection between your PC 

and the router has been established well.   

 

Figure 3-1 Success result of Ping command