TP-LINK AC750 User Manual

 

- 39 - 

If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless 
connection between wireless adapter and router using either Push Button Configuration (PBC) 
method or PIN method. 



 

To build a successful connection by WPS, you should also do the corresponding configuration of 
the new device for WPS function meanwhile. 

Use this method if your client device has a WPS button. 

Step 1:  Press the WPS/Reset button on the back panel of the router, as shown in Figure 4-17. 

You can also keep the default WPS status as Enabled and click the Add device button 

in Figure 4-16. Then choose “Press the button of the new device in two minutes” and 

click Connect, shown in Figure 4-18. 

 

Figure 4-17 

 

Figure 4-18 Add A New Device 

Step 2:  Press and hold the WPS button of the client device.   

Step 3:  The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup 

process.  

Step 4:  When the WPS LED is on, the client device has successfully connected to the router.   

Use this method if your client device does not have the WPS button, but has a Wi-Fi Protected 

Setup PIN number.