TP-LINK TD-W8950ND User Manual

1. Click 

the 

Add button in Figure 4-32, and you will see the next screen as shown in Figure 4-33. 

Figure 4-33 

2. Enter 

the 

Filter name for the rule, it is exclusive and must be filled. 

3. Select 

the protocol: TCP/UDP, TCP, UDP or ICMP in the drop-down list for the connection 

between the Source IP address and Destination IP address. 

4. Enter 

a 

Source IP Address in dotted-decimal notation format and then type Source Port 

(port or port: port) in the text boxes separately. 

5. Enter 

a 

Destination IP Address in dotted-decimal notation format and then type Destination 

Port (port or port: port) in the text boxes separately. 

6. Click 

Save/Apply to save this entry. 

ination IP Address blank, 

 Port blank, it suggests that all Source Ports 

vanced Setup”Æ“Security”Æ“MAC Filtering”, you can configure MAC Filtering rules 

n as shown in Figure 4-34. The section allows you to control access to the Internet by 

)

When you add an Outgoing IP Filtering entry, you must configure at least one condition on the 
preceding screen except the Filter name. If you leave the Protocol blank, it means that the rule is 
effective to all protocols, if you leave the Source IP Address and/or Dest
it suggests that all Source IP Addresses and/or Destination IP Addresses are controlled by the 
rule, if you leave the Source Port and/or Destination
and/or Destination Ports are controlled by the rule. 

Choose “Ad
on the scree
users on your local network based on their MAC Address. 

)

MAC Filtering is only effective on ATM PVC(s) configured in Bridging mode. 

40